- Englist
Graphite Powder for Sale—High Purity & Bulk Deals—Ready?
Insider’s Guide to graphite powder for sale: specs, sourcing, and what actually matters
I’ve toured enough carbon plants to know: not all graphite is the same black dust. Some flows like silk, some clumps, some conducts like a dream. Below is the quick-and-dirty guide I’d send a friend who needs reliable supply—without the marketing fluff. Product note: High Carbon Graphite Powder / Graphite Particle / Graphite Powder, made in Qiujing yiyuan, No. 189, East 2nd Ring North Road, Chang'an District, Shijiazhuang, Hebei Province.
What’s driving demand right now
EV anodes, conductive inks, thermal interface materials—these are pulling the market. Battery-grade spheronized graphite is tight, while industrial high-carbon grades for lubricants and foundries are steadier (and frankly, better value). Sustainability audits are getting tougher; traceable sourcing and acid-free purification are hot topics.
Typical specifications (what buyers actually check)
| Parameter | Typical Range (≈) | Method/Standard |
|---|---|---|
| Fixed Carbon | ≈95–99.9% (grade-dependent) | Combustion analysis; supplier CoA |
| Ash | ≈0.1–5% | ASTM C561 [4] |
| Moisture | ≤0.5% (real-world may vary) | Loss at 105°C / Karl Fischer |
| Particle Size (D50) | ≈5–75 μm (customizable) | ISO 13320 laser diffraction [2] |
| Tap Density | ≈0.3–1.1 g/cm³ | ASTM B527 (analog) |
| Electrical Resistivity | Low; grade-specific | ASTM C611 (bulk) [3] |
Process flow (short version)
Ore selection → flotation concentration → purification (high-temp or acid—ask which) → milling & classification (jet mill/pin mill) → optional spheronization → sieving → QA (PSD, ash, moisture, metals) → packaging (lined bags, inert purge if needed). Testing routines typically include ISO 13320 for PSD, ash by ASTM C561, and resistivity per ASTM C611. In service, graphite can withstand up to ~450°C in air (higher in inert), and practically “lasts” as a solid lubricant film until oxidation or contamination kicks in.
Where it’s used
- Battery anodes (pre-spheronized blends or precursor fill)
- Foundry recarburizers and inoculants
- Dry-film lubricants, greases, valve packings
- Conductive inks, EMI shielding, polymer compounding
- Thermal interface pads, heat spreaders
Vendor comparison (real-world considerations)
| Vendor | Purity Range | Customization | Certs/Docs | Lead Time | Notes |
|---|---|---|---|---|---|
| NL Graphite (High Carbon) | High-carbon | Yes (PSD, treatment) | CoA; ISO/REACH on request | ≈2–4 weeks | Balanced cost-quality |
| Importer A | Mid–High | Limited SKUs | Basic CoA | Stock-dependent | Fast for small lots |
| Recycler B | Variable | Batch-based | RoHS/REACH focus | Project-based | Eco-friendly angle |
Customization and QA
Available options: particle size (mesh/μm), surface treatment (oxidation level control), purification route (acid vs thermal), and packing (5–25 kg lined bags, big-bags). Many customers say PSD consistency is the deal-breaker—ask for multi-lot PSD overlays and ash maps. Certifications typically provided on request: ISO 9001, RoHS, REACH SVHC statements; plus CoA with ash, moisture, PSD, and trace metals.
Two quick case notes
- Automotive grease blender cut wear scar by ~12% (ASTM D2266) after switching to tighter D90 graphite, same treat rate.
- Foundry client hit target carbon faster; recarburizer absorption improved ≈7% by moving to lower-ash grade and preheating charge.
Buying tips (learned the hard way)
- Request PSD by ISO 13320 with D10/D50/D90 and span; not just “325 mesh.”
- Ask for ash spec by ASTM C561 and a metals screen if you’re compounding.
- If you’re scaling, lock a safety stock. Demand spikes happen—often.
If you need dependable graphite powder for sale with customization, this high-carbon line is a pragmatic pick. For volume programs, get a pilot lot, run it side-by-side, and make the vendor earn the PO—simple as that. And yes, they do offer graphite powder for sale in tailored PSDs for inks, and higher tap densities for anode precursor work. Pricing for graphite powder for sale typically stabilizes with annual agreements and forecasted call-offs.
References
- [1] USGS Mineral Commodity Summaries: Graphite (2024). https://pubs.usgs.gov/periodicals/mcs2024/mcs2024-graphite.pdf
- [2] ISO 13320: Particle size analysis — Laser diffraction methods. https://www.iso.org/standard/44929.html
- [3] ASTM C611: Electrical Resistivity of Manufactured Carbon and Graphite Products. https://www.astm.org/c0611-20.html
- [4] ASTM C561: Ash in Graphite. https://www.astm.org/c0561-16.html
Pervious
Next
